Marine Propspeed coating at Waterfront City Marina

Marine Propspeed coating at Waterfront City Marina

If your vessel is moored at Waterfront City Marina, it’s exposed to constant marine growth and corrosion risk, especially below the waterline. Waterz Edge offers on-site application of Propspeed, the industry-leading foul-release coating designed to protect underwater metal components like propellers, shafts, struts, and rudders.

Propspeed enhances your boat’s performance, fuel efficiency and lifespan—all without harming the marine environment.

What is Propspeed?

Propspeed is a two-part foul-release coating system. It’s applied to underwater metals to prevent marine growth from attaching. Unlike toxic antifoulants, Propspeed relies on a super-slick silicone finish to prevent build-up. When your boat is in motion, the growth simply washes away.

This makes it ideal for areas with heavy biofouling, like Melbourne’s busy Waterfront City Marina. Propspeed is non-toxic, copper-free, and safe for use in both salt and freshwater.

Key benefits of Propspeed

• Improved fuel economy and speed:
  Reducing drag improves fuel efficiency and engine performance. In tests, Propspeed users reported fuel savings of 4–8% depending on vessel size and usage patterns.

• Stops marine growth on running gear:
  Propspeed effectively prevents barnacles, algae and other biofouling from taking hold on props, shafts, and other underwater metal.

• Prevents electrolysis and corrosion:
  The primer layer isolates metal surfaces from the water, reducing corrosion and extending component life.

• Eco-friendly alternative:
  Free from biocides and heavy metals, Propspeed meets strict environmental standards.

• Reduces long-term maintenance costs:
  With fewer fouling issues and no need for scraping or harsh cleaners, Propspeed simplifies routine upkeep.

The Propspeed application process

Applying Propspeed isn’t a DIY job, it’s a detailed, multi-step procedure best handled by trained technicians. Here’s what’s involved:

1. Preparation:
   All surfaces must be dry, free of growth, and sanded to create a mechanical bond. Old coatings or corrosion are removed and finished to 80-grit standard.

2. Degreasing and conditioning:
   The metal is cleaned and chemically prepped to promote adhesion.

3. Priming:
   Two coats of etching primer are applied. Timing between coats is crucial, this is where experienced technicians make the difference.

4. Topcoat application:
   A single clear silicone layer is applied over the primer. It must go on within a precise window after priming.

5. Curing time:
   The full coating cures over 8–12 hours, longer in colder weather.

Improper surface prep, delays between coats, or dust exposure can all cause failure. That’s why Waterz Edge applies Propspeed on-site using dedicated, controlled equipment and follows Propspeed’s certified instructions to the letter.

Maintenance and reapplication

Propspeed typically lasts 12 to 24 months depending on usage, water conditions, and mooring time. Regular inspections during haul-out or servicing help determine when to reapply.

Signs of wear include:

• Localised peeling or flaking

• Sluggish acceleration

• Increasing drag or vibration

Waterz Edge can remove old Propspeed and reapply the system efficiently during annual service.

Propspeed application at Waterfront City Marina

Waterz Edge isn’t based at Waterfront City Marina, but we regularly carry out mobile Propspeed applications for vessels docked there. Our team is experienced, punctual, and fully equipped to perform the work safely at your berth, no need to haul out or move the vessel unless required.

If your vessel’s performance is lagging or fouling keeps returning, Propspeed is the smart upgrade. Waterz Edge offers expert application—on time, on location, and built to last.

Contact Waterz Edge now to book your Propspeed coating at Waterfront City Marina. Keep your props clean, your fuel bills down, and your boating hassle-free.